Difference between revisions of "Analysis Framework Previous"

(Layout of the analysis framework (prior to geWorkbench 2.3.0))
(Layout of the analysis framework (prior to geWorkbench 2.3.0))
 
Line 14: Line 14:
  
 
==Layout of the analysis framework (prior to geWorkbench 2.3.0)==
 
==Layout of the analysis framework (prior to geWorkbench 2.3.0)==
 
===Prior to releases 2.3.0===
 
  
  

Latest revision as of 15:13, 15 October 2013

Layout in versions 2.3.0 to 2.4.1

GeWorkbench 2.3.0 Main GUI MicroarrayViewer.png

Versions of geWorkbench prior to 2.5.0 had an additional layer of data organization, called the "Project", within the Workspace. The user could define any number of separate projects.

Project Folders Analysis ANOVA.png

These versions also provided the analysis components with a way to override any activated marker are or array set, in the form of the "All Arrays" and "All Markers" checkboxes, at the bottom of each component.


ANOVA Parameters w.png


Layout of the analysis framework (prior to geWorkbench 2.3.0)

The graphical user interface for geWorkbench is divided into four major sections, for

  1. Data management - Workspace and Projects (upper left)
  2. Visualization tools (upper right)
  3. Marker and Array/Phenotype set selection and management (lower left)
  4. Analytical tools (lower right)

GeWB GUI MicroarrayViewer.png


Areas 2, 3 and 4 are defined for convenience. The actual placement of a given component into any of these three areas is controlled by a configuration file and can be customized as desired.



Prior to geWorkbench version 2.3.0, most analysis routines were located in a fixed panel found at lower right in the graphical interface.

T Analysis Params List.png


At upper left of the framework is a list of available analysis routines (as loaded using the Component Configuration Manager). At upper right is a list (labeled "Saved settings list") which can store named sets of customized parameter settings for each different analysis.

Creating saved parameter sets (prior to geWorkbench 2.3.0)

The current parameter settings could be saved by pushing the Save Settings button. A dialog appeared asking for a name for the new set of saved parameters.

T Analysis Params Save.png

In the below figure, the default settings have been saved to a set called "Default Settings".

T Analysis Default Settings.png


The next figure illustrates changing a couple of parameters and saving them to a new set called "New Settings".

T Analysis Params New.png